However when a second USB is plugged into the USB port, only the second USB is now detected. For example, USB 1 is plugged into the USB port, and USB 1 is detected successfully. Note: USB detection will check the latest plugged in device.
If the USB LED does not light up and the USB flash drive is not detected, and the same situation happens even when the user has changed to another USB flash drive and/or USB port, contact the local reseller or distributor for repair or replacement services. I changed the identifier and flashed it through nsa310recoveryusb. Three days of study) Now installed stock version. The 310 has, in contrast to the 310s, an e-Sata port, which gives the 310 the possibilities of a 2 disk nas, including RAID0 and RAID1 arrays. The appliance will copy the firmware file to RAM, once detected. Router> configure terminal Router (config) usb-storage update-firmware enable Plug the USB flash drive (with firmware file) into the ZLD appliance. You will need to SSH/Telnet/Console into the device to issue the command(s).
#Zyxel nsa310 firmware update usb drives drivers#
Good afternoon Thank you very much for the answer. NSA310 and 310s use the same user's guide. Enable the USB firmware upgrade function via CLI command. DriverAssist performs an in-depth scan of your entire system and all devices attached to it and verifies that you have the latest and most compatible drivers installed. It determines which drivers are missing, corrupt or obsolete. I think they should have the way to help user to change the TDC device to standard version. When the copy target folder and copy direction have been configured, users can press the Copy/Sync button once, and the data will be copied from the USB flash drive to the NAS target folder successfully. Zyxel Nsa310 Firmware Update Usb Drives DriverAssist performs an in-depth scan of your entire system and all devices attached to it and verifies that you have the latest and most compatible drivers installed.
#Zyxel nsa310 firmware update usb drives how to#
Go to Management page > Applications > “Copy/Sync Button”, check if the copy direction is USB > NAS and check the NAS copy target. How to download and update firmware zyxel nsa210 firmware update Download digital photo Cameras firmware : most of the camera s internal parts including lenses, autofocus, LCD screens etc. ZyXEL NSA310 Media Server Firmware 4.61(AFK0)C0 2,176 downloads. Change and use another USB flash drive with any of the above formats and try again.Ĥ. ZyXEL NSA310S Media Server Firmware 4.75(AALH.1)C0 447 downloads. Check the status of the USB port LED: if the LED is not lighted, insert the USB flash drive into another USB port and try again.ģ. This package provides the necessary installation files of ZyXEL NSA310 Media Server Firmwate version 4.70(AFK.1)C0.
Make sure the format of the USB flash drive is “ FAT, FAT32, NTFS, ext2, ext3 or ext4”, which are the only formats supported by the NAS.Ģ. Why can't users save the data from a USB flash drive to the NAS/NSA via the copy/sync button? Stepġ.
0 kommentar(er)
